A toilet is one of the most important fixtures in your home, but it’s often one of the most neglected. When was the last time you thought about whether your toilet needs to be repaired? It might be time to buy a new, better one! But choosing a toilet requires careful consideration as many flashing designs now exist. Some work ok, some works very well, and some will not last long.
Flushing Efficiency is Important
In 1994, a mandate went into effect that forced companies to reduce the toilet’s tank size to save water. As a result, 3.5 to 5-gallon tanks were replaced with 1.6-gallon ones as required by the law. You might think that this has caused the flushing efficiency to go down, but that is not the case. Thanks to innovative design, the flushing efficiency has actually gotten better!
Toilet Basics
The design of the toilet can make a huge impact on how well it can flush. While the tank size is important, a poorly designed toilet with a large tank will have a weaker flush than modern strongest flushing toilets.
Siphonic or washdown
If you’re looking for a toilet with a strong flush, you’ll need to decide between a siphonic or washdown model. Siphonic toilets are the most common type, and they use a trapway to create a water seal that prevents sewage gasses from escaping. On the other hand, washdown toilets use a flushing rim to force water down into the bowl, and they’re often used in commercial settings.
So, which one is right for you? If you’re concerned about water conservation, then a siphonic toilet is the way to go. These toilets use less water per flush. However, if you’re looking for sheer power, then a washdown toilet is the better option. These toilets can move a lot of waste with each flush, so they’re ideal for busy households since they’re a lot less likely to clog
Gravity-fed vs pressure-assist
There are two main types of toilets on the market: gravity-fed and pressure-assist. Gravity-fed toilets rely on gravity to create a powerful flush, while pressure-assist toilets use a pump to force water into the bowl.
Gravity-fed toilets
Gravity-fed toilets use gravity to pull the water into the bowl. This means that there is no need for a pump or other mechanical device to push the water into the bowl. The water is simply pulled down by gravity. The advantages of gravity-fed toilets include:
- Low maintenance. There are no moving parts to break or clog, and they can be easily repaired if something goes wrong.
- Low water consumption. Because the water is pulled down by gravity, there is no need to use as much water to flush the toilet. This can save a lot of water over time, which is good for the environment.
The only downside of gravity-fed toilets is that they require a higher water level in the tank to function properly. This means that they may not be suitable for all homes.
Pressure-assist toilets
If you’re looking for a powerful flush, then a pressure-assist toilet is the way to go. This type of toilet uses a tank that stores water under pressure, which is then released into the bowl when you flush. The result is a much stronger flush than with a gravity toilet.
Pressure-assist toilets are generally more expensive than gravity toilets, but they’re also more powerful and can save you water in the long run. If you’re looking for a top-of-the-line flush, then a pressure-assist toilet is the way to go.
Which One to Choose?
So, which type of toilet is right for you? If you’re looking for a toilet with a strong flush, you’ll want to choose a pressure-assist model with a washdown design. Pressure-assist toilets can empty an average 1.6-gallons tank creating a force of a 5.5-gallon flush, so they’re sure to get the job done.
